Milwaukee, dewalt, bosch. Wil they get expensive because theyr all made in chiners?
What are the political rammifications?
Will tools get more expensive with the tariffs?
already manufactured in America
tariffs
Where do you think they get the washers, screws, and ball bearings from
Most of them are made here. In fact we export about $7 billion in bolts screws nuts and washers to other countries.
I wonder if Traxxas, an American company will admit they have chinks build their shit now.
I have snap on, fuck snap on.
when 4% of the components you need to manufacture a piece go up by a whopping 104%
Oh no an extra $2 in screw and ball bearing costs? Noooo
Snap on sisters, our response?
The parts to put it together come from outside the USA. You MAGAturds are truly retarded.
Chink made tools are fucking shit no matter what brand is stamped on it.
The warranty is worthless because it will just break again and again.
That's $2 I could have used to buy toilet paper you fucking idiot.
$2 more for a tool he shouldn't have to replace for a decade
bitching this hard
okay
With regards to the EU, yes quite possibly at least with ones made in the USA.
Snap on sisters, our response?
Of those Bosch won't because they're German.
Why did the mg725 after like 2018 turn into a plastic pile of shit? The original mg725 was boss.
The plastic bodied cordless impact is also trash, it’s like the body twists or gets play and the battery makes a poor connection. My biggest issue was reps taking cash and not applying it to my account, conveniently forgot.
But bosch is also made in chiner right? Will the chiners give europe no tariffs?
WITH GLOBAL MATERIALS
nigger, all the shit that is done in jewsa is screwing the plastic shells of the tools to claim they were finished in jewsa.
can anyone explain why the Milwaukee logo is so kino?
Fapoff is shit
Don't think so. Might use some Chinese parts but they're made in Germany as far as I know.
White on red. You are probably just seeing your flag there, cuyo anon.
Cost cutting and unifying most tool internals to ease manufacturing across many, many brands.
I repair old Porter Cable tools by buying off-brand bullshit chinese tools and breaking them up for parts. The switch, motor, and connection boards all have identical manufacturing marks.
Batteries are identical as well.
Depends actually.
Like makita. There is a local and an export tier.
Japan keep their red makita for themselves and those things are sought after everywhere but are almost impossible to get, you need to get someone to buy them directly in Japan and send it to you. I heard the euro bosch is the same to some degree.
Is this true? Bosch blue made in germany?
Good morning to all my fellow Milwaukee Chads.
Might be the case.
American name honkong based company. They play you with marketing and farmiliar names.
Not saying its bad quality
This isn't my flag. I'm a passport chad.
you stupid motherfucker
I think so.
bosch
some of their tools are still made in Germany / EU
also there are plenty of non Chinese tools
all my powertools are
festool
100% the best
and made in Germany / Czech Rep.
Good morning to all my fellow Milwaukee Chads.
Hitachi / Metabo Master-race checking in.
Tools will be made in the US to high quality, they will last 50 years.
Passport fag
Lmao
Just feast con cuyo
Is it really this easy to fool Americans?
>festool
Magnificent tools, expensive as fuck.
800$ Cordless drills are a bit rich for my check.
The shop I used to work at was all-Fes-all-day.
Rep gave us lots of swag. They even make nice T-shirts.
Milwaukee is very expensive in europe thoughbeit
Kill yourself you faggot fuck.
jeets dont use toilet paper
check mate
chinwaukee red army and their fans are reaching BMW driver levels of being annoying
sent from a Makita plunge saw
don't care
Ehat about kemppi welders, they’re made in finlands or something, right?
Magnificent tools, expensive as fuck.
yeah
but you actually get what you pay for
my parents festool drill is ~20y old, used almost daily and still works
I bought most of them for renovations for my house
what are 5k€ for tools when you already spend 500k€ for a house and renovations?
The shop I used to work at was all-Fes-all-day.
because they are engineered and build to perfection
it just works
if a shop can afford them, they will never change to something else
what are 5k€ for tools when you already spend 500k€ for a house and renovations?
(laughing) Very true.
because they are engineered and build to perfection
Also true. Festools are just this side of science-fiction.
cringe faggot redditor
no idea bruh, i use kuhtreiber welder
made in Germany / Czech Rep.
Wera does the same thing. I think most are made in the latter now. Easily my favorite hand tools along with Beta from Italy.
festool
I ordered one of their new filters about a week ago. Original ship was supposed to be tomorrow, now they’re saying someone in May. Probably due to tariffs.
but you actually get what you pay for
I always considered those tools not for DIY or basic repairs, but rather for creating art. The best craftsman use them for making nice furniture and similar things.
Is it really this easy to fool Americans?
Unfortunately, yes. Few understand the difference between ASSEMBLED in America and "all the thousands of needed components were MANUFACTURED in America." Many products have become too complex for any company to source 100% domestically (including China). Either Trump either knows this, but he's banking on Americans to be too retarded to catch on to the tariff grift, or he doesn't know it because he's a retard boomer who thinks everything is made from leather, steel, stone, and wood.
From Asian components, retard.
You will own nothing, not even the libs who are going to stomp you into the dirt such that there is no Republican president for 20 years for this unforced error.
What's a good tools brand that I should buy? Ideally not some rebranded chinese crap, if that's still possible.
All I can see at the hardware shops are Makita, Bosch.
Magatards will act like things are fine when aerospace, automotive, oil and gas, and Haas are invoking force majeure clauses and laying people off. Just repeating "this strengthens American manufacturing" until they believe it.
NEETs and culture war podcasters don't know things, and they have no interest in learning how things work - which is why they're dead wrong and tripping all over themselves with empirically wrong and mutually exclusive copes.
I'm putting muh tool up your dad's ass while he's fucking you while you're sleeping.
Just get the Bosch.
The goyman QAs are keeping the chinks in line just fine.
Love the seething third worlders moving the goalposts.
yeah b-b-but it’s not 100% made in America! H-Hah! W-uh I mean Jews win!
Shit has gotten so bad, most shit straight up just says “Made in China” all over it. You cannot say “Made in America” if it was literally shipped from the hands of an emaciated Chinese 8 year old into your hands. If they want to have an entire factory housing employees just to have them turn one (1) screw to say “Assembled in America” then fine. It’s a step in the right direction.
b-b-ut it’s still expensive! ha-haha!
Moving them again. How pathetic
I am a tool reseller and one of my main jobs is keeping the prices in my system updated. Milwaukee prices go up on May 1st. Most of the electric power tools, particularly the cordless stuff is made in China. Many of those items are going up 25%.
For people that don't know, Milwaukee is literally owned by a Chinese company. Their products are made in over 20 different countries but about half of their 9000+ items are made in China.
So in other words, white people should buy bosch blue which is made by achmed in germany
just buy used ones on craigslist
Ive been eyeing a milwaukee drill rattle thing. Its rattles the screws in. Its the 12volt version, i used one of soemone else and i liked it. Maybe i should buy now becore march then
May*
Probably talking about an impact driver. It doesn't look like those are scheduled to increase yet.
Yes, the impact driver. Those r very handy. So how many americans you think dont know milwaukee is chinese owned? 99%? 99,9%? Ive been watching the milwaukee reddit thing and those dudes spend all their paycheck on this bullshit things they dont need.
You mean to tell me the guy from fear factor who shills nutrient supplements doesn't know everything about macroeconomics?
Okay.
If they want to have an entire factory housing employees just to have them turn one (1) screw to say “Assembled in America” then fine. It’s a step in the right direction.
But that will never happen unless capitalism is removed from the mix of our economy. Unless the government wants to regulate profits of all business -- much like profits of regulated utilities are capped -- capitalism will always mandate reducing expenses to keep margins high. Our high cost of labor is fine for assembling/selling high-value items like...jet engines. But building factories and paying workers to assemble clothes, shoes, etc. is never, ever going to happen. The party of "business" know this -- which makes it obvious this tariff shit is just a huge grift.
I would buy Makita before I resorted to Bosch slop
kek those are fuck easy to produce domestically retard
They're all chinkshit you jew.
Rogan isn't even the worst offender. I was referring more to Cerno, Posobiec, and Tim Pool who genuinely don't know shit about shit.
When the unironic fascists like BAP and Myth20c crew are sounding the alarms and not boosting Trump about this alongside everyone else, that's should be a sign that this policy is very wrong.
Traitor
Founded … in Milwaukee, WI
Huh. I had no idea.
This is how retarded miggers actually are
So how many americans you think dont know milwaukee is chinese owned?
Most folks are ignorant about such matters and judge things at face value. There is a reason that all the Chinese crap sold at Harbor Freight has American sounding names like "Chicago Electric" or "Pittsburgh" or "U.S. General"
maybe kill yourself crybaby woman faggot
better stock up on Harbor Freight tools now.
pic unrelated
milwaukee
manufactured in america
lmfao not for decades, retard
all of their dog shit tools are using chink butter steel
Unironically here because everywhere else either has poor quality or gay euro shit fasteners
Yeah believe it or not we had an industrial revolution and made absolutely god tier tools. How the fuck else were we supposed to fix the god tier automobiles?
I've been seeing harbor freight commercials recently, never have seen them before.
This is how a retard (sub-120 IQ) reveals himself. The inability to consider first and second order logical consequences, the nigger-like fixation on only whats directly spoonfed to him. Behold and tremble, the drooling retarded visage of the MIGGER!
Cause it looks like an electrified 70's beer logo, like Coors.
Yes.
I have a developing working knowledge of local history, and even a print of this poster, but I didn't know about Snap-On specifically. Added to the long, long list of how cool my state was and how what's left is being squandered.
I don't buy battery power tools.
Until there are battery standards, they can all fuck off.
So you’re saying you dont diy?